Seems to take values of 0xc2 or 0x A JMicron-specific driver is available only for Windows. There seems to be some confusion in this thread. Also tried jmicron hot plug different driver revisions. Duufus, I had in the past this card:
|Date Added:||22 July 2015|
|File Size:||42.68 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
I did not experiment with the values of these bits except for toggling bit hhot. Now do the following: Posted June 22, edited. Could you pass on a link please of your setup? Posted January 20, Originally Posted by cbjaust.
And hot plugging on XP seems to work. I made changes at three locations: Find More Posts by Basil.
Hot plug on the ICH9R – Hard Disk Drives (HDD) – StorageReview Forums
Will this method damage the raid configuration and so doing the o. Fortunately, there is a procedure simple for the cognoscenti, somewhat more difficult for the novice that will salvage hot-swap ability and the possibility of RAID configuration.
Hto Function 43 Defaults to 0x It’s really upsets me when tech manufacturers claim a feature is present and working while it actually isn’t. Kmicron all sincerity though, hotplug is quite a bit nicer supported under linux these days.
JMicron JMB Add-on Card AHCI mode « Blog
I’m using the latest BIOS on my motherboard, as well. I speculate its purpose is to disable the option ROM, allowing the main BIOS to set up the rest of the device configuration without interference. Posted June 11, If not you can try adding the device id to the plist. Follow the prompts as if you were installing the software:. But no point as all Intel chipsets would have the same problem.
JMicron JMB363 Add-on Card AHCI mode
Mainly the MSI board? Find More Posts by GokAy. In fact the v2. Since that worked I ran a cable up to my hot-swap cage, so I can take a SATA drive jmicron hot plug slide it into the caddie and pop jmidron into the cage without opening my computer up I was using the internal headers, not eSATA.
Can we get an update for firmware v1. I can’t seem to hot swap an external SATA drive.
I want to create an AHCI patched verson of 1. You can use these HTML tags.
I have not used this tool before; investigate it for yourself before installing unknown software. The tray icon to safely remove eSata devices plugged into an external port of an ICH9R system should be coming out in a future release of the Intel Matrix Storage Drivers but don’t quote me on that.
This will NOT install the software, just extract the files. Posted June 11,